Vector Optics Dovetail to Picatinny Scope Mount Clip-In Rail Adapters (SCRA-06B)
SCRA-06B
£10.00
Upgrade your old-school dovetail rail to accept modern Picatinny-mounted scopes and accessories—quickly, cleanly, and without hassle.
If you’ve got an airgun or rifle with a dovetail rail but want to run Picatinny optics or accessories, these clip-in rail adapters from Vector Optics are the smart fix. The SCRA-06B adapter set bridges the gap between older dovetail systems and the increasingly standardised Picatinny rail format, without the need for permanent modifications.
Key Features:
Quick Clip-In Design – Simply insert the adapters into your Picatinny scope mount or accessory, then clamp the whole unit onto your dovetail rail. The spring-loaded fit ensures a snug and reliable grip.
Anti-Recoil Pin Compatible – Includes a spring-loaded recoil pin to keep things tight and zeroed, especially useful on spring-powered air rifles. Just wind it down into position after installation.
Ideal for Upgrading Older Rifles – Convert classic airguns or budget builds to work with today’s Picatinny-based optics, red dots, lasers, or mounts.
Sold as a Pair – Enough to convert one scope mount (or similar accessory).
Important Usage Notes:
Not compatible with rounded or chamfered-top dovetail rails, often found on older springers or certain BSA PCPs. If your rail isn’t flat, these adapters won’t seat properly. For those, we recommend a permanent solution such as the Eagle Vision dovetail-to-Picatinny conversion rails, available here:
https://www.vector-air.co.uk/product-page/eagle-vision-dovetail-to-picatinny-ris-conversion-railsAnti-recoil pin must be adjusted on spring-powered rifles—especially important for rear mounts.
These adapters are not permanent—they're designed for temporary or flexible setups.
A perfect fix for modernising your airgun without breaking the bank or breaking out the tools. Clip in, tighten down, and get shooting.
Quantity
Disclaimer for Dovetail Rail Compatibility
Disclaimer for Dovetail Scope Mounts: Compatibility Alert
Dovetail mounts are crafted to offer broad compatibility with most dovetail rails. However, it's essential to note exceptions in rail dimensions used by specific gun manufacturers.
Manufacturers like BSA and GAMO employ a 13mm dovetail rail (measured at 13.5mm), while FX and Walther utilize a 9.5mm dovetail rail. These dimensions differ from the standard 11mm dovetail scope mounts.
Fitting standard dovetail mounts onto oversized dovetail rails may lead to incorrect gun/mount/scope alignment. On the other hand, fitting them onto undersized rails could result in sliding or rocking when installed.
For firearms featuring these over/under-sized dovetail rails, Vector Air recommends either utilizing equal pull mounts like BKL or considering the conversion to the modern and standardized Picatinny RIS (Rail Integration System). Ensuring proper compatibility guarantees an optimal shooting experience.
Proper Use of Scope Mounts on Recoiliing Guns
Disclaimer: Proper Use of Scope Mounts on Recoiling Guns
Before using scope mounts on recoiling guns, such as spring/gas ram air rifles, rim/centerfire guns, and blowback airguns, please read and understand the following disclaimer:
Creep Risk: The use of dovetail mounts on recoiling guns may result in creep due to the absence of anti-recoil locking pins. Creep is the gradual movement of the mounts along the gun's rail during recoil.
Recommendation: It is strongly recommended to use recoil arrester blocks or recoil stoppers to mitigate the risk of mount creep. The Vector Optics Riflescope Recoil Stopper (SCOT-05) is one such product that can help stabilize your scope mounts.
Alternative Solution: An alternative solution to prevent mount creep is to convert your dovetail rails to Picatinny rails. Picatinny rails offer a more secure attachment and eliminate the need for recoil pins and arrester blocks.
Adapter Rails: You can find dovetail-to-Picatinny rail conversion adapters, such as the Eagle Vision Dovetail to Picatinny RIS Conversion Rails. These adapters provide a stable platform for your scope mounts, reducing the risk of movement during recoil.
User Responsibility: It is the user's responsibility to ensure that the chosen mounting solution is appropriate for the specific firearm and shooting application. Improper use may lead to damage to equipment, decreased accuracy, or potential safety hazards.
Consultation: If you have any doubts or concerns regarding the compatibility of your chosen scope mounts with your firearm, consult with a qualified gunsmith or a knowledgeable professional in the field.
Disclaimer Acceptance: By using dovetail mounts on recoiling guns, the user acknowledges the potential risks and accepts full responsibility for the choice of mounting solution and any consequences that may arise from its use.
Remember, safety should always be a top priority when using firearms and related accessories.
