I have a KWC P08 co2 Luger. A couple of weeks ago it started to jam after a couple of shots. Removal of the mag. revealed a couple of BB’s falling out of the mechanism ( not the mag ), Suspecting a mag feed problem, I bought a new mag…..to no avail…same issue. Gun has had very little use, so it’s not likely to be a wear issue. Any ideas. ….or….any reputable repairers? thnx
top of page
bottom of page
If this is regarding the 6mm Airsoft pistol, then more often than not it is the hop-up bucking causing this, if possible use some rubber-safe degreaser and wind the hop-up off. See if the fault continues.
This can normally happen as the hop-up and barrel have been over lubricated and as such the feed nozzle is not moving through the rubber correctly. An over hopped rubber can also cause this. If it is a 4.5mm Air pistol, the likely thing that causes this is the ammunition. Make sure you are only using high-grade steel BB's. Not copper (as these deform) and cause jams.